We fix what's broken, fast, and we don't disappear after the invoice. Emergency dispatch available across Hobart and the surrounding zip codes.
Call +1-866-805-8548 and describe what your system is doing — the symptoms help us send a tech prepared with the right parts.
You'll get a flat-rate quote before any repair work begins — no guessing what the final bill will look like.
If anything feels off after we leave, a follow-up call gets a technician back out to make it right.
Leonard HVAC didn't start as a franchise chasing volume. Our crews carry manufacturer certifications across the major residential and commercial equipment lines.
You won't find us buried under layers of call-center scripts — we're the team that shows up in the truck, not a subcontractor we've never met. Every job we run is backed by full liability coverage and current state licensing, and we keep that documentation available on request for every job, routine or emergency.
Hobart's climate swings hard, and generic national playbooks don't always fit. That local knowledge shapes the parts we stock on the truck — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Ask around Hobart and you'll hear the same complaint about a lot of HVAC companies. That's the gap we built Leonard HVAC to close. Every dispatcher, every technician, and every follow-up call is held to the same standard, because a customer who trusts us once tends to call us again — and Hobart is a small enough community that reputation travels fast.
Our office team is based locally too, not routed through an out-of-state call center that's never seen a Hobart rooftop unit. We keep parts inventory stocked based on what actually fails most often on Hobart's housing stock.
We cover the full range of heating, cooling, and air quality work Hobart properties actually need.
Breakdowns rarely happen at a convenient time, which is exactly why our emergency line runs 24 hours a day. Our Hobart dispatch team prioritizes no-heat and no-cooling calls so a technician is diagnosing your system as fast as physically possible.
Once a technician is on-site, the goal is always a same-visit repair — most emergency calls in Hobart get resolved in a single trip, not a multi-day back-and-forth.
An aging system that's constantly breaking down usually costs more to keep patching than to replace. We walk Hobart homeowners through load calculations so the new system is sized correctly for the actual square footage before a single piece of equipment gets ordered.
We protect floors and entryways during the install and haul away the old equipment so you're not left dealing with disposal.
A retail floor, a restaurant kitchen, or an office suite can't run without stable climate control. Our commercial division services rooftop units and package systems across Hobart, with priority response for facilities that can't afford downtime.
Property managers working with multiple Hobart locations can set up a standing account so every site gets consistent service history and pricing.
A seasonal tune-up catches the kind of wear that turns into a mid-summer no-cool call. Beyond standard tune-ups, we also handle duct cleaning and sealing to stop conditioned air from leaking into attics and crawlspaces for Hobart households that want more than just temperature control.
A tune-up typically takes under an hour and covers the checkpoints most likely to catch a problem before it becomes a breakdown.
This is the standard every Hobart technician on our team is held to.
Every repair comes with a workmanship warranty explained in plain terms before we leave.
If a competitor's written quote for the same scope of work is genuinely lower, ask us about it.
A technician doesn't consider the job done until the system is tested and performing correctly.
Most breakdowns don't happen without warning — they announce themselves for weeks before the system actually quits.
A healthy system runs with a consistent, low hum — banging, screeching, or grinding usually points to a loose part or failing motor.
This is one of the most common complaints we hear on service calls across Hobart.
Gradual efficiency loss is easy to miss month to month, but it adds up fast over a season.
A system that won't hold a steady cycle is often fighting a sizing issue, a thermostat problem, or a refrigerant imbalance.
A musty smell often points to mold or moisture buildup somewhere in the ductwork.
Repeated repairs on an aging system are usually the clearest sign that replacement will save more money than another patch job.
You'll know the cost before a wrench touches your system.
Dispatchers give you a realistic arrival window instead of a vague "sometime today".
Parts and labor are backed by warranty terms explained in plain language.
Every technician carries current state licensing and manufacturer training.
We explain what failed, why it failed, and what the options are.
Maintenance plan members get priority scheduling and discounted rates.
Every review below reflects an actual service call in the Hobart area.
"Our AC quit on the hottest weekend of the year and they had a tech out within a couple of hours. No pressure to buy a whole new system when a repair was all we needed."
"Signed up for the annual plan after our first repair and it's paid for itself already. Never once felt like I was being upsold on something I didn't need."
"Had a full system replacement done and it was the smoothest home project I've had in years. Followed up a week later just to check everything was still running fine."
"Commercial dispatch was quick and the tech understood our system without needing to be walked through it. Documentation for our records was thorough and easy to file."
"Got quotes from four different companies for a replacement and this was the only one that actually walked me through the load calculation. My energy bill dropped noticeably the first month with the new system."
"Called at 11pm during a heat wave and honestly didn't expect anyone to pick up, let alone show up. This is the company I'm saving in my phone now."
After thousands of service calls across Hobart, a handful of causes show up again and again.
The shift between peak heating and peak cooling demand is exactly when older or neglected equipment tends to fail. Before the coldest stretch of the year, a heating system benefits from a full safety inspection, checking the heat exchanger, ignition system, and airflow to catch any issue that could turn into a no-heat emergency.
Setting a programmable or smart thermostat to a consistent schedule reduces the number of times the system has to work hard to catch up to a big temperature swing. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
Our technicians train across the major residential and commercial equipment lines, so you're not limited to a single brand's service network. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
We don't outsource dispatch to a call center that's never met our technicians.
Handles the majority of Hobart installs and specializes in properly sizing equipment for older housing stock.
Known for fast, accurate diagnostics on no-heat and no-cool breakdowns.
Works directly with Hobart property managers to schedule around business hours.
Because our trucks are staged near Hobart, average arrival windows run faster than what national chains typically offer.
We explain the diagnostic fee upfront and provide a flat-rate repair quote once the issue is identified.
We staff after-hours dispatch specifically because HVAC failures rarely happen on a convenient schedule.
Yes — licensing and insurance documentation is available on request for any job, residential or commercial.
As a general guideline, if a system is past 12-15 years old and facing a costly repair, replacement often makes more financial sense.
Ask your technician about current plan pricing during any service call.
Our dispatch area extends throughout the greater Hobart region and nearby towns within Hobart, OK.
Our commercial team handles rooftop units, multi-zone systems, and facility contracts alongside our standard residential repair work.
Yes, we service systems regardless of who originally installed them.
Financing options are available for qualifying replacement installations, and our team can walk you through what's currently offered.
Most Hobart homes benefit from two tune-ups a year — one before cooling season and one before heating season.
If you smell gas or burning, shut off the system at the breaker and step outside, then call us immediately.
We'd rather quote it honestly on the phone than have you feel ambushed by the bill.
More involved repairs, like a coil replacement or a refrigerant leak repair, take longer and the tech will give you a realistic estimate before starting.
Let dispatch know ahead of time if access will be handled differently than a standard homeowner visit.
Our technicians are familiar with both, which means less time spent figuring out your specific setup and more time actually fixing the problem.
Larger properties get the same upfront pricing and licensed technicians as a single-family service call, just coordinated at scale.
We accept standard payment methods for repairs and smaller jobs, and we'll always tell you upfront what a given service is likely to cost so there's no last-minute scramble to figure out payment. If a rebate or local incentive program applies to your Hobart installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
If your address falls within Hobart, OK and near Hobart, there's a strong chance we already service your street.
Coverage isn't limited to a single neighborhood or subdivision — our Hobart dispatch zone stretches across the metro area and into the surrounding suburbs and unincorporated communities.
